Laser Power Probes
Macken Instruments
Quick and Easy Laser Power Measurement.
Laser power measurements should be quick and easy. They should not involve time consuming set-up and alignment problems. Ideally, the measurements should also be able to be made at any point in an optical system where losses are likely to occur.
The Power Probes are calorimeter-type power meters which measure laser power using a timed exposure. They display average power absorbed on a calibrated readout scale and can be used with continuous or repetitively pulsed lasers ranging from small 2 watt YAG lasers to large 10,000 watt CO2 lasers.
The Power Probes are calorimeter-type power meters which measure laser power using a timed exposure. They display average power absorbed on a calibrated readout scale and can be used with continuous or repetitively pulsed lasers ranging from small 2 watt YAG lasers to large 10,000 watt CO2 lasers.
Comet High Power Water Cooled Laser Probes
Ophir
The Comet series is high power water cooled thermal sensors that is simple to use, economical but also highly accurate. It operates by measuring the heat rise from a 10 second exposure to a laser beam and thereby calculates the laser power.
- Comet 1K: Portable low-cost power probe for low powers
- Spectral Range: 0.2-20μm
- Power range: 20W-1kW
- Aperture: Φ50mm
- Comet 10K: Portable low-cost power probe for high powers
- Power range: 200W-10kW
- Aperture: Φ100mm
- Spectral Range: YAG & CO2
- Comet 10K-HD: Portable low-cost power probe with high damage threshold
- Aperture: Φ55mm
- Power range: 200W-10kW
- Spectral Range: YAG & CO2
Contact us 
